包装尺寸 | 13.79 x 8.89 x 1.9 cm; 41 克 |
---|---|
产品颜色 | Red |
制造商参考信息 | VGR-P7 |
TOMSIN 替换操纵杆适用于 Xbox One 系列 X/S 控制器,4 件真正的橡胶拇指修理套件适用于 Xbox One 无线控制器(红色)
TOMSIN Replacement Joysticks for Xbox One Series X/S Controller,4PCS True Rubberized Thumbsticks Repair Kit for Xbox One Wireless Controller(Red)
页面含机器翻译,中文仅供参考,以原文为准
TOMSIN Replacement Joysticks for Xbox One Series X/S Controller,4PCS True Rubberized Thumbsticks Repair Kit for Xbox One Wireless Controller(Red)
|
海外自营
广告
¥147.14¥147.14

12期7.5%费率,每月仅 ¥13.20 最高12期,多种分期方式可选 了解更多
灵活选择分期付款:结算时,选择花呗分期和您需要的分期数。此处仅为按商品金额(未包括税费)估算的示例,实际金额以结算金额为准。
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥50.18×3期 | ¥3.38 (2.3%) | ¥150.52 |
¥25.66×6期 | ¥6.62 (4.5%) | ¥153.76 |
¥13.20×12期 | ¥11.04 (7.5%) | ¥158.18 |
提升您的购买力
- [兼容性] 与您的 Xbox Core 无线控制器、Xbox 系列 X、Xbox 系列 S.Xbox One完美兼容,可替换破损或磨损的控制器拇指棒
- [*技术] 表面光滑明亮,像艺术工艺一样更加耐用和精致,让您的握把感觉到原来,再次像新的一样
- [ 新设计 ] 拇指根部和侧面采用柔软橡胶涂层,不用再担心控制器模拟棒滑落
- [握手用] 橡胶操纵杆/拇指棒,1 x T8螺丝刀,1 x 撬具,1 x 三角开口拨片
- [关于我们的产品] 在TOMSIN,我们对我们的产品有信心。 如果您有任何疑问,请随时通过亚马逊电子邮件系统与我们联系,我们将尽力解决这些问题。
- [COMPATIBILITY] Perfectly compatible with your Xbox Core wireless controller,Xbox Series X,Xbox Series S.Xbox One,replace your broken or worn-out controller thumbsticks
- [Upgrade Technique]Smooth and bright surface,More durable and refined just like art craft,make your grips feel the original and like new again
- [New Design] Coated with soft rubber for the top and sides of your thumbsticks, no longer have to worry about slipping off the analog stick of your controllers
- [For Your Grips] 4 x true rubberized Joysticks/Thumbsticks, 1 x T8 Screwdriver, 1 x Prying Tool, 1 x Triangle Opening Picks.
- [For Our Products] At TOMSIN we stand by our products. If you have any questions, please feel free to contact us via Amazon Email System and we will do our best to solve them.
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B0BLNHQ8ZM |
---|---|
用户评分 |
4.9 颗星,最多 5 颗星 |
Amazon.cn上架时间 | 2022年11月24日 |
制造商 | TOMSIN |
我来补充
商品描述
产品描述:
适用于 Xbox 系列 X/S、Xbox One 控制器的橡胶替换拇指棒
如果您难以固定拇指棒,在 YouTube 上安装视频将对您有帮助。
如果您不知道如何安装它们,请在 YouTube 上观看安装视频将有帮助,请小心耐心将避免一些不必要的错误。
包装清单:
4 x 操纵杆拇指棒
1 x T8 螺丝刀
1 x 撬具
1 x 三角开口拨片
注意:
不包括控制器。
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
5.0 颗星,最多 5 颗星
10 条评论

Matt Clemente
5.0 颗星,最多 5 颗星
Has everything you need, except directions
2022年11月29日 -
已在美国亚马逊上发表
These are perfect for replacing the worn out thumbsticks on my Xbox core controller, the one that came with my Xbox one s a few years back. The old one was shedding bits of rubber when I played, so it was time.
I opted for the red and blue, but when I got the package, the red is a little more on the pink side. So, I went for blue on my controller. I will use the red ones on my backup.
The pry bar is key for pulling the controller apart. Take your time, and slide the bar along the bottom side to release the tabs, then you should be able to pull the rest of the panel off without too much effort. Just take your time.
Once the side panels are off, there are two screws on each side, and one screw hiding under the label in the battery compartment. Don't worry, that label is super sticky, and will go back to sticking when you're finished. So unscrew all 5 screws and put them aside.
Now, the top and bottom will separate from the guts of the controller. You can just pull the old joystick off the post. Notice, the post is a rounded rectangle shape. The replacement sticks are, too, but it's harder to tell. Look at the picture, and you can see the orientation for pushing the new joystick onto the post.
When reassembling, I put the battery compartment screw in first, then put the two screws near the buttons in next, then the back screws. The housing just snaps back into place, and voila! Done! Took me about 20 minutes. Enjoy!
I opted for the red and blue, but when I got the package, the red is a little more on the pink side. So, I went for blue on my controller. I will use the red ones on my backup.
The pry bar is key for pulling the controller apart. Take your time, and slide the bar along the bottom side to release the tabs, then you should be able to pull the rest of the panel off without too much effort. Just take your time.
Once the side panels are off, there are two screws on each side, and one screw hiding under the label in the battery compartment. Don't worry, that label is super sticky, and will go back to sticking when you're finished. So unscrew all 5 screws and put them aside.
Now, the top and bottom will separate from the guts of the controller. You can just pull the old joystick off the post. Notice, the post is a rounded rectangle shape. The replacement sticks are, too, but it's harder to tell. Look at the picture, and you can see the orientation for pushing the new joystick onto the post.
When reassembling, I put the battery compartment screw in first, then put the two screws near the buttons in next, then the back screws. The housing just snaps back into place, and voila! Done! Took me about 20 minutes. Enjoy!


Matt Clemente
评论于 2022年11月29日 在美国 🇺🇸 发布
I opted for the red and blue, but when I got the package, the red is a little more on the pink side. So, I went for blue on my controller. I will use the red ones on my backup.
The pry bar is key for pulling the controller apart. Take your time, and slide the bar along the bottom side to release the tabs, then you should be able to pull the rest of the panel off without too much effort. Just take your time.
Once the side panels are off, there are two screws on each side, and one screw hiding under the label in the battery compartment. Don't worry, that label is super sticky, and will go back to sticking when you're finished. So unscrew all 5 screws and put them aside.
Now, the top and bottom will separate from the guts of the controller. You can just pull the old joystick off the post. Notice, the post is a rounded rectangle shape. The replacement sticks are, too, but it's harder to tell. Look at the picture, and you can see the orientation for pushing the new joystick onto the post.
When reassembling, I put the battery compartment screw in first, then put the two screws near the buttons in next, then the back screws. The housing just snaps back into place, and voila! Done! Took me about 20 minutes. Enjoy!
该评价的图片






1 个人发现此评论有用

Ooh, shiny gadget.
5.0 颗星,最多 5 颗星
I switch-ified my XBox One controller
2023年1月4日 -
已在美国亚马逊上发表
After a couple of years of intense gaming on my XBox One controller, the rubber on my left analog stick pretty much rubbed smooth, losing grip. Eventually, the rubber actually rubbed off. Add to that, the right stick began to stick a little for some reason.
I knew it was time to attempt a repair. While doing so, I thought I'd pick interesting colors for the analog sticks to make it fun. I bought the TOMSIN Replacement Joysticks for Xbox One Series X/S Controller in the Nintendo Switch blue/red combo.
The installation was straightforward. Just followed a teardown video on youtube and used the included tools. The tools came in handy to pry the plastic open and unscrew the screws holding the controller together.
Replacement was simple. Just pull off the old analog sticks and pop in the new ones. They fit perfectly and now, I have a controller that feels new and responsive. Great product.
I knew it was time to attempt a repair. While doing so, I thought I'd pick interesting colors for the analog sticks to make it fun. I bought the TOMSIN Replacement Joysticks for Xbox One Series X/S Controller in the Nintendo Switch blue/red combo.
The installation was straightforward. Just followed a teardown video on youtube and used the included tools. The tools came in handy to pry the plastic open and unscrew the screws holding the controller together.
Replacement was simple. Just pull off the old analog sticks and pop in the new ones. They fit perfectly and now, I have a controller that feels new and responsive. Great product.


Ooh, shiny gadget.
评论于 2023年1月3日 在美国 🇺🇸 发布
I knew it was time to attempt a repair. While doing so, I thought I'd pick interesting colors for the analog sticks to make it fun. I bought the TOMSIN Replacement Joysticks for Xbox One Series X/S Controller in the Nintendo Switch blue/red combo.
The installation was straightforward. Just followed a teardown video on youtube and used the included tools. The tools came in handy to pry the plastic open and unscrew the screws holding the controller together.
Replacement was simple. Just pull off the old analog sticks and pop in the new ones. They fit perfectly and now, I have a controller that feels new and responsive. Great product.
该评价的图片



Tyler T.
5.0 颗星,最多 5 颗星
Fun Replacement Joysticks
2023年1月4日 -
已在美国亚马逊上发表
Replacement sticks are a good way to get some extra life out of your Xbox controller. The best part is, these are fun and colorful, adding a little personality to your controller.
The packaging comes with everything you need to replace your joysticks. Even if you’ve never done it before, it’s not too difficult of a task. Just search the web for a tutorial video in case you aren’t familiar with where some of the hidden screws or tabs are.
I like that this set comes with both a stick prying tool and a pick, as I much prefer the pick. Many other sets only have the stick tool that can be quite flimsy.
The packaging comes with everything you need to replace your joysticks. Even if you’ve never done it before, it’s not too difficult of a task. Just search the web for a tutorial video in case you aren’t familiar with where some of the hidden screws or tabs are.
I like that this set comes with both a stick prying tool and a pick, as I much prefer the pick. Many other sets only have the stick tool that can be quite flimsy.


Tyler T.
评论于 2023年1月3日 在美国 🇺🇸 发布
The packaging comes with everything you need to replace your joysticks. Even if you’ve never done it before, it’s not too difficult of a task. Just search the web for a tutorial video in case you aren’t familiar with where some of the hidden screws or tabs are.
I like that this set comes with both a stick prying tool and a pick, as I much prefer the pick. Many other sets only have the stick tool that can be quite flimsy.
该评价的图片


Eric T Farmer
5.0 颗星,最多 5 颗星
Perfect replacement for worn caps
2022年12月4日 -
已在美国亚马逊上发表
I had a controller with the thumbstick worn down to the plastic underneath the rubber and had been putting off replacing it. I decided to give these a try and I am not disappointed at all. I have all the tools to replace the caps, but decided to use only the tools in this kit to see how the experience would be. Literally everything you need is included. The screwdrivers weren't the most comfortable, but they get the job done. The plastic spudgers do a great job prying the shell apart without damaging it. The only thing I used outside of this kit was a heat gun to gently pry the sticker out of the battery compartment and some isopropyl alcohol to clean the controller while I had it open. The new thumbsticks feel much better than the old ones, but that might be a fair comparison since the others were worn down to the plastic. Overall, it was super simple and my controller feels brand new.