Unplug the washer before installing this part. Wear work gloves to protect your hands.
This W10913953 actuator is for washers
Actuator W10913953 shifts the splutch and monitors the position of the splutch.
W10913953 Washer Shift Actuator
The actuator has an optical sensor that tells the washing machine when to shift from one function to another. It shifts the transmission from agitating to spinning, and if the part is not working correctly, the water will pump out of the machine, but the spinner will not work to spin water out of the clothes. When the actuator fails, the washing machine will make loud noises when it is supposed to switch from agitating to spinning. The actuator should be replaced to keep the machine working.
Disconnect the power and water source from the machine
Remove the water hoses and drain line
Tape the lid shut and lay the washing machine on its front side so that the bottom is accessible
Remove the panel off the bottom and locate the actuator
Remove and replace the actuator
Reverse the steps to reassemble the washer and reconnect the power Perfect Fit, High Quality & Easy To Install
Works Like A Charm
This part fixes the following symptoms:
Pumps but will not spin | Will not agitate | Spins slowly.
Compatible with:
Whirlpool, Kenmore, Maytag, Amana, Roper, Crosley, Inglis
This part fixes the following symptoms:
Pumps but will not spin | Will not agitate | Spins slowly
Replaces Part Numbers
This Part #W10913953 replaces these parts:
W10597177, W10815026, W10913953VP, WPW10597177, PD00032232, 4455082, AP6037270, PS11769864, EAP11769864
W10913953 Shift Actuator compatible with Whirlpool, Maytag, Kenmore, Amana Washing Machine 7MWGT4027HW0, WTW4616FW0, WTW4815EW0, WTW4900BW1, WTW4915EW1， WTW5000DW1, WTW5000DW2, MVWC415EW2, MVWC565FW1, RTW4516FW0, RTW4641BQ1, 11025132410, 11025132411.
跳至主要内容
