Brand | SSK |
---|---|
制造商 | SSK Corporation |
商品尺寸 | 11.4 x 3.8 x 1.2 cm; 109 克 |
Is Discontinued By Manufacturer | 不是 |
颜色 | 灰色 |
是否包含电池 | 不是 |
商品重量 | 109 g |
SSK 铝制 USB C 至 M.2 NVMe SSD 免工具外壳,便携式 USB 3.1 Gen 2(10Gbps) 至 NVMe PCI-E M-Key 固态硬盘 外部适配器,支持 UASP(仅适用于 M.2 NVMe SSDs 2242/2260/2280)
SSK Aluminum USB C to M.2 NVMe SSD Tool-Free Enclosure, Portable USB 3.1 Gen 2(10Gbps) to NVMe PCI-E M-Key Solid State Drive External Adapter Support UASP(Fits only M.2 NVMe SSDs 2242/2260/2280)
页面含机器翻译,中文仅供参考,以原文为准

![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥79.72×3期 | ¥5.38 (2.3%) | ¥239.14 |
¥40.73×6期 | ¥10.52 (4.5%) | ¥244.28 |
¥20.95×12期 | ¥17.53 (7.5%) | ¥251.29 |
提升您的购买力
- 【兼容性和高速】 - 推荐这款 USB-C * 2 代 10Gbps 或 Thunderbolt 3 以实现极速性能。 一个高清电影传输只需2秒;向下兼容USB 3.1 Gen2和USB 3.0,高达5Gbps。 M.2 M-Key SSD外壳仅适用于 NVMe M-Key M.2 SSD(基于PCIE)。 不支持基于M.2 SATA的固态硬盘、M.2 PCIe AHCI SSD、M.2 PCIe设备,如WiFi和捕获卡、mSATA SSD和非M.2外形SSD。
- 【无需工具】 - 无需工具的设计可以快速方便地安装您的 M.2 NVMe SSD,超越传统,完全省去了拧紧的麻烦,易于使用和携带。使用高性能NVMe媒体时,可读取/写入性能超过800MB/s
- 【铝合金外壳】 - 采用铝合金外壳,超薄设计,经久耐用,散热性能卓越,携带方便;注意:不包含NVMe SSD。 包括 2 个热垫,USB C 型和 USB 3.0(A 型)电缆。
- 【蓝色指示灯】 - 蓝色指示灯显示数据传输状态,简单清晰;必须在主机操作系统上支持 SSD 文件系统才能访问。 与所有固态硬盘一样,使用前必须格式化新媒体。
- 【高品质主芯片】 - 采用高性能控制器IC,符合 UASP,修剪可有效提高速度和延长固态硬盘的使用寿命。即插即用兼容多操作系统,Windows 7 / 8 / 8.1 / 10 / Linux / MAC 。
- 【Compatibility & Hight Speed 】- This USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds; Backward compatible with USB 3.1 Gen2 and USB 3.0 up to 5Gbps. M.2 M-key SSD Enclosure only Suitable for NVMe M-Key M.2 SSD (PCIE-based). Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
- 【Tool-Free 】- Tool-Free design allows quick and easy installation of your M.2 NVMe SSD, surpassed the tradition and completely saving the trouble of screwing, easy to use and portable.Capable of performance over 800MB/s read/write when using high performance NVMe media
- 【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry; Note: NVMe SSD is not included. Includes 2 x Thermal Pad,both USB Type-C and USB 3.0 (Type-A) cables.
- 【Blue Indicator 】- Blue Indicator shows the data transfer status, easy and clear;SSD file system must be supported on host operating system to be accessible. As with all SSDs, new media must be formatted before use.
- 【High Quality Master Chip 】- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and extend the lifetime of SSD.Plug-and-play compatibility with Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC.
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B0892BK5L6 |
---|---|
用户评分 |
4.5 颗星,最多 5 颗星 |
亚马逊热销商品排名 | 商品里排第6,491名电脑\IT (查看商品销售排行榜电脑\IT) 商品里排第59名硬盘架 |
Amazon.cn上架时间 | 2020年7月10日 |
我来补充
商品描述
Product Specifications :
Product name: M.2 NVME PCIe SSD Tool-Free enclosure adapter
Interface type: M.2 NVME PCIe to USB 3.1
Transfer Rate : Up to 10Gbps
Case Size: 114*38*12mm
Material: Aluminum alloy
Cable Type : Type C to Type-C
Cable Length: 150mm
Support SSD Drivers Size: 242, 2260, 2280mm
Color: Grey
Features:
1. USB 3.1 Type-C extreme fast and high-capacity data transfer solution, Data transfer rate up to 10Gbps for USB 3.1;
2. Supports NVME PCIE-based M.2 SSD;
3. Easy installation & no driver required, No additional power required;
4. Supports Plug & Play and Hot-Swapping;
5. Multi OS Supported, like Windows, Mac OS & Linux etc.
Package Included:
1 x M.2 NVME PCIe to USB 3.1 Type-C SSD Enclosure
1 x USB 3.1 Type-C to Type-C Cable
1 x Screw Set
Please note that it supports NVME PCIE-based SSD only. It does NOT support SATA based SSD.
We tested our enclosure with Sumsung 970 EVO NVMe SSD, the actual speed can reach to 1000MB/s on R/W. But to this speed, pls make sure the Laptop TYPE C port is also comply with USB3.1 Gen 2(10Gbps), if USB3.1 Gen 1(5Gbps), then speed will be only half.
For the brand new SSD drive, it may not be found, so please format it before the first time using. Pls format it to corresponding type which Windows and Mac supported.
Follow step is to find the brand new ssd drive:
1. Use your mouse right key to click "Computer", it will show a drop-down menu;
2. Use your mouse left key to click "Computer Managment";
3. Use your mouse left key to click "Disk Management”;
4. After find the brand new ssd drive, please format it, and made partition. Then you can find the drive normally.
Product Specifications :
Product name: M.2 NVME PCIe SSD Tool-Free enclosure adapter
Interface type: M.2 NVME PCIe to USB 3.1
Transfer Rate : Up to 10Gbps
Case Size: 114*38*12mm
Material: Aluminum alloy
Cable Type : Type C to Type-C
Cable Length: 150mm
Support SSD Drivers Size: 242, 2260, 2280mm
Color: Grey
Features:
1. USB 3.1 Type-C extreme fast and high-capacity data transfer solution, Data transfer rate up to 10Gbps for USB 3.1;
2. Supports NVME PCIE-based M.2 SSD;
3. Easy installation & no driver required, No additional power required;
4. Supports Plug & Play and Hot-Swapping;
5. Multi OS Supported, like Windows, Mac OS & Linux etc.
Package Included:
1 x M.2 NVME PCIe to USB 3.1 Type-C SSD Enclosure
1 x USB 3.1 Type-C to Type-C Cable
1 x Screw Set
Please note that it supports NVME PCIE-based SSD only. It does NOT support SATA based SSD.
We tested our enclosure with Sumsung 970 EVO NVMe SSD, the actual speed can reach to 1000MB/s on R/W. But to this speed, pls make sure the Laptop TYPE C port is also comply with USB3.1 Gen 2(10Gbps), if USB3.1 Gen 1(5Gbps), then speed will be only half.
For the brand new SSD drive, it may not be found, so please format it before the first time using. Pls format it to corresponding type which Windows and Mac supported.
Follow step is to find the brand new ssd drive:
1. Use your mouse right key to click "Computer", it will show a drop-down menu;
2. Use your mouse left key to click "Computer Managment";
3. Use your mouse left key to click "Disk Management”;
4. After find the brand new ssd drive, please format it, and made partition. Then you can find the drive normally.
产品规格:
产品名称:M.2 NVME PCIe SSD 免工具外壳适配器
接口类型: M.2 NVME PCIe 至 USB 3.1
传输速率 :高达 10Gbps
表壳尺寸:114*38*12mm
材质:铝合金
电缆类型 :C 型到 C 型
电缆长度:150mm
支持 SSD 驱动器尺寸:242、2260、2280mm
颜色:灰色
特点:
1. USB 3.1 Type-C 超快、高容量数据传输解决方案,USB 3.1数据传输速率高达10Gbps;
2. 支持基于NVME PCIE的M.2 SSD;
3. 安装简单,无需驱动,无需额外电源;
4. 支持即插即用和热插拔;
5. 支持多种操作系统,如 Windows、Mac OS 和 Linux 等。
商品清单:
1 个 M.2 NVME PCIe 转 USB 3.1 Type-C SSD 外壳
1 x USB 3.1 C 型至 C 型电缆
1 x 螺丝套装
请注意它仅支持基于 NVME PCIE 的 SSD。 不支持基于 SATA 的 SSD。
我们用Sumsung 970 EVO NVMe SSD测试了我们的外壳,R/W的实际速度可达1000MB/s 。 但是为了此速度,请确保笔记本电脑C型端口也符合USB3.1 Gen 2(10Gbps),如果USB3.1 Gen 1(5Gbps),那么速度将只有一半。
对于全新的固态硬盘驱动器,可能找不到,因此请在*次使用前格式化。 请格式化为 Windows 和 Mac 支持的对应类型。
接下来是找到全新 SSD 驱动器:
1. 使用鼠标右键点击"电脑",就会显示下拉菜单;
2. 使用鼠标左键点击"计算机管理";
3. 使用鼠标左键单击 "Disk Management";
4. 找到全新的 SSD 驱动器后,请格式化并进行分区。 然后您可以正常找到驱动器。
无顾客评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
此商品在美国亚马逊上最有用的商品评论

I bought this to act as an external boot drive on my laptop, for those limited periods when I need to run windows. Couldn't for the life of me figure out why it ran so slowly and then today, on a whim, I plugged it into my desktop via USB-C and ran a benchmark. 40MB/s max both read and write. Tried USB3, 40MB/s both read and write. USB2, You got it, 40MB/s both read and write.
Just because it has a USB-C connector, doesn't make it USBC if the onboard controller is running at USB1.1. This is an absolute fraud.
And because a picture is worth 1,000 words, I've attached the benchmark results for USBC, USB3, USB1, and a comparison test with the same NVMe drive on a different adapter @ USB3 (450MB/s Read, 105MB/s write)

2021年11月2日 在美国审核
I bought this to act as an external boot drive on my laptop, for those limited periods when I need to run windows. Couldn't for the life of me figure out why it ran so slowly and then today, on a whim, I plugged it into my desktop via USB-C and ran a benchmark. 40MB/s max both read and write. Tried USB3, 40MB/s both read and write. USB2, You got it, 40MB/s both read and write.
Just because it has a USB-C connector, doesn't make it USBC if the onboard controller is running at USB1.1. This is an absolute fraud.
And because a picture is worth 1,000 words, I've attached the benchmark results for USBC, USB3, USB1, and a comparison test with the same NVMe drive on a different adapter @ USB3 (450MB/s Read, 105MB/s write)






2021年12月8日 在美国审核



Starting off, I put a M.2 NVMe 2280 in it, it works, fine, whatever. However:
1. The lock mechanism slides into the shell of the carrier, but is spring loaded so it pushes against the shell while sliding in and out. It makes one of the worst nails-on-a-chalkboard screeching noises I've heard in ages while doing this.
2. I'd actually prefer this requiring tools versus what it is as tool-less. There's a tiny hex screw that goes from the underside into a brass thumb screw for holding the M.2 in place. The thumb screw has a ring that rests against the M.2's screw semi-circle. It works, but it is very fiddly to get mounted.
3. It includes 2 thermal pads to help cool the SSD. Based on how the carrier slides in and out of the shell, you'll get one use out of it before it rips itself apart, assuming it works properly. If you use it, then go to open it again, and the thermal pad looks fine, it's not working. If it's making full contact with the M.2 and the carrier's shell, then sliding it open will just tear the thermal pad apart.
Again, it works, and it's easier to just deal with this than deal with a return, but it's poorly engineered.
Also, for some reason Amazon asked me to rate "easy to recognize" as a feature? I gave it 1 star, it's clearly a dime a dozen Shenzhen product.