包装尺寸 | 19.69 x 11.43 x 6.99 cm; 350 克 |
---|---|
产品颜色 | 3 针 XLR 红色母头麦克风 |
制造商 | Cmple |
商品重量 | 350 g |
Cmple - [10 件装] XLR 紧凑 3 针母头插孔麦克风连接器,麦克风扬声器,金属音频线适用于耳机、放大器、搅拌器 - 红色/黑色
Cmple - [10 Pack] XLR Compact 3-Pin Female Jack Microphone Connector, MIC Speaker, Metal Audio Cable for Headset, Amplifiers, Mixers - Red/Black
页面含机器翻译,中文仅供参考,以原文为准
Cmple - [10 Pack] XLR Compact 3-Pin Female Jack Microphone Connector, MIC Speaker, Metal Audio Cable for Headset, Amplifiers, Mixers - Red/Black
广告
目前无货。
欢迎选购其他类似产品。
欢迎选购其他类似产品。
- XLR 3针母麦克风插孔:适用于麦克风连接、放大器、音频电子设备和布线应用。 专业音频设备非常适合标准3针孔配置,带XLR输出。
- 兼容性:允许高达 18 AWG 电缆。 非常适合无线麦克风、耳机麦克风、放大器、电鼓、混音器等音频连接。
- 高品质材料: 镀镍触点为连接器提供高强度锌合金压铸外壳。 坚固的压铸外壳提供卓越的*和抗压力性,确保稳定的传输。
- 即插即用:使用方便,组装非常快速,无需担心螺丝。 适合 4 毫米外径麦克风电缆。
- 包装清单:10 x CMPLE 3-Pin XLR 母头麦克风连接器
- XLR 3-PIN FEMALE MIC JACK: Ideal for microphone connections, amplifiers, audio electronics, and cabling application. Professional audio equipment is perfectly suited by the standard 3-pin hole configurations with XLR outputs.
- COMPATIBILITY: Allows up to 18 AWG cables. Perfect suits audio connection for wireless microphone, headset microphone, amplifiers, electric drums, mixers, and more.
- HIGH QUALITY MATERIAL: Nickel plated contacts provide high strength zinc alloy die-casting housing for the connector. Strong die-casting shell provides excellent resistance to oxidation and pressure that ensures stable transmission.
- PLUG AND PLAY: Easy to use, assembly is very quick and no screws to worry about. Suits 4mm outside diameter microphone cables.
- PACKAGE INCLUDE: 10 x Cmple 3-Pin XLR Female Microphone Connector
产品信息
技术细节
更多信息
ASIN | B084TTHMHX |
---|---|
用户评分 |
4.3 颗星,最多 5 颗星 |
我来补充
商品描述
10 件装 - CMPLE - XLR 3 针母插孔麦克风连接器
Cmple3-Pin XLR 连接器的主要用途是将麦克风连接到音频设备,并提供*短的 XLR 电缆端接。
此连接器具有标准 3 针孔配置,适合具有 XLR 输出的专业音频设备。
具有完全包围的金属插入物,用于保护目的。
我们小巧方便的连接器由镀镍触点提供的高强度锌合金压铸外壳保护。
它还具有出色的抗压和氧化能力,确保稳定的传输。
这款XLR适配器兼容多种设备,包括但不限于:麦克风,耳机,混音器,EQ,键盘,
电鼓、电钢琴、机架齿轮、放大器和其他兼容电缆应用和音频电子产品。 *多可接受 18 AWG 电缆。
这款 3 针 XLR 适配器使用非常方便,无需螺丝,组装快速。具有平衡传输模式,外部防干扰。
重型橡胶 O 型环可牢固地连接麦克风或公 XLR 。 适合 4 毫米外径麦克风电缆。
此适配器的规格如下:
连接器类型: XLR 3针(母头)插孔
颜色:红色/黑色
商品重量:22.7 克
包装数量: 10
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
3.2 颗星,最多 5 颗星
15 条评论

Thomas Avent
4.0 颗星,最多 5 颗星
A lot of plastic, and bit costly.
2016年4月29日 -
已在美国亚马逊上发表已确认购买
It probably would have been better to buy this in bulk, like a set of 10, but this single unit for the expediency of shipment was well worth the premium.
The contacts were easy to tin, though there was a lot of plastic that can be melted near them. Steady hands, a thin soldering iron tip, and a vice or a helping hands tool is a necessity for quality connections and efficiency.
Plenty of volume in the sleeve, so don't worry if you have a bit of excess cable. Be sure to use heat shrink tubing as the outside of the sleeve is metal and can potentially ground or short your signal if you're not careful.
Be sure to pair this product with some good quality cable!
The contacts were easy to tin, though there was a lot of plastic that can be melted near them. Steady hands, a thin soldering iron tip, and a vice or a helping hands tool is a necessity for quality connections and efficiency.
Plenty of volume in the sleeve, so don't worry if you have a bit of excess cable. Be sure to use heat shrink tubing as the outside of the sleeve is metal and can potentially ground or short your signal if you're not careful.
Be sure to pair this product with some good quality cable!
1 个人发现此评论有用

Jim
4.0 颗星,最多 5 颗星
Decent quality
2014年1月26日 -
已在美国亚马逊上发表已确认购买
I needed to make some custom cables to fit into a mixer that is in a rack drawer and due to the pinout of all right angle cables; I needed one that was the opposite; so that the cable would come out the back of the unit instead of the front.
I bought this so that I could spin the pins around and make it work how I needed.
I had to drill a small hole on the opposite side to accommodate the screw being on the opposite side of the body.
Worked great and I got exactly what I needed.
I bought this so that I could spin the pins around and make it work how I needed.
I had to drill a small hole on the opposite side to accommodate the screw being on the opposite side of the body.
Worked great and I got exactly what I needed.
2 个人发现此评论有用

SC gal
2.0 颗星,最多 5 颗星
Extremely cheap construction.
2021年4月19日 -
已在美国亚马逊上发表已确认购买
The quality of this is far below the quality of a professional connector. The plastic spacer that holds the pins melts when the wires are soldered to the pins. The pot metal is very cheap. Because my use of this is in a place that will rarely need to be disconnected, it is an adequate connector, but that's all -adequate. If this was used in a situation where it was connected and disconnected often, it wouldn't last long.

Robert J.
5.0 颗星,最多 5 颗星
Surprising high quality for the price!
2016年5月6日 -
已在美国亚马逊上发表已确认购买
At this price, I almost expected the shell to be made out of plastic but it is metal (I'd guess plated cast zinc). The "cover" does not have a locking tab like more expensive right angle connectors I have used, but I don't see it as a problem. These are being used in a permanent installation, but even if they were going to be unplugged and plugged in all the time I don't think there would be a problem.
Surprising high quality for the price!
Surprising high quality for the price!
1 个人发现此评论有用