This product is connected to a 3/8 screw tripod.5 3/8" Mounting Heads, 2 Adjustable.3/8" to 1/4" Screw Adaptor included
The versatile swivel joint allows positioning at almost any angle also can DIY assembly by more combinations
Cross Arm is a kind of double pan tilt head owning four extended arm,which can install four different direction,able to operate more camera at the same time and also can install the light.
Made of aluminum alloy tube; diameter height: 3.14 inches; length: 23.62 inches; diameter: 1.18 inches; net weight: 2.66 lbs, maximum 11 pounds
NOTE:Tripod, Camera and Quick Release Plate are NOT included
1.0 颗星,最多 5 颗星Tripod Arm does not function Properly, Not recommended!
2020年11月24日 - 已在美国亚马逊上发表
尺寸: 23.62 Inch已确认购买
Tripod Arm does not function Properly, Not recommended! When you attach anything to the 3/8" mounting points that item, accessory, table, etc. is not secure at all. Bottomed out and as tight as it will go... wobbles. I tried a laptop table accessory and it wobbled so badly I almost lost a 2 k workstation! No way to correct as far as I can see. I have tried several solutions to make the bar functional and all no go. Be careful of your stuff if you use this tripod bar accessory. Not recommended at all!
I looked at this item for a long time, then projects were coming my way- where I really needed it, and works great. This extension bar is sturdy to be used with my heavy tripod, ball head and heavy camera & lens, and to use a counter weight. The two other adjustable camera mounts are made to come off or put one at the other end to help use as at counter weight. This is not for lightweight tripods or lightweight light stands. The end mounts have 3 set screws, one was coming out, so I put small piece of tape over each screw, to keep them in place when not in use. I bought this just in time for photographing negatives on a light pad - and for a large object placed on floor and the arm extended out longer. My camera has an L bracket & I use a rail to attach to the bracket, which makes it easier for small adjustment height of the camera. This way i am not adjusting 3 tripod legs or the main center tube which holds all the weight. In the future, the 2 adjustable camera mounts will come in handy.
5.0 颗星,最多 5 颗星
Just what I needed.
2021年5月27日 在美国审核
I looked at this item for a long time, then projects were coming my way- where I really needed it, and works great. This extension bar is sturdy to be used with my heavy tripod, ball head and heavy camera & lens, and to use a counter weight. The two other adjustable camera mounts are made to come off or put one at the other end to help use as at counter weight. This is not for lightweight tripods or lightweight light stands. The end mounts have 3 set screws, one was coming out, so I put small piece of tape over each screw, to keep them in place when not in use. I bought this just in time for photographing negatives on a light pad - and for a large object placed on floor and the arm extended out longer. My camera has an L bracket & I use a rail to attach to the bracket, which makes it easier for small adjustment height of the camera. This way i am not adjusting 3 tripod legs or the main center tube which holds all the weight. In the future, the 2 adjustable camera mounts will come in handy.