Claptrap here is supposed to be able to hold a controller or a device in his arms. However, straight out of the box, his left arm hangs too low. If I extend his middle "danger" area, he can still hold a controller, but it isn't stable. As far as holding a device, he can hold my phone or the Nintendo Switch only if I have them precariously balanced on the right side. If they are charging, they will not balance (which it is specifically advertised that you can). Should you be lucky and get one with both arms in the correct place, it will probably function as advertised.
Aesthetically, this thing is awesome. It's sturdy and looks great. This is why I decided to keep it anyway. Even if it's just being used as a Claptrap statue, it's pretty good.
Overall, I would recommend this product, but be wary. If buying in person, check that his arms are both in the correct places (even with each other in a line across the middle "danger" piece). If buying online, you may need to do a few returns before getting one that doesn't have messed up arms.
精致游戏电缆器 - Borderlands Claptrap - 充电控制器和设备支架 - 玩具 - Xbox 360
平台 : GameCube, Xbox 360, Electronic Game, Game Boy, Xbox, Nintendo Wii, PlayStation2, PlayStation, PlayStation 3
|
人气 |
海外自营
广告
¥275.81¥275.81
+ ¥32.18 预估进口税费

促销信息
买满2件售价9.5折优惠。
共1个促销
-
买满2件售价9.5折优惠。
购买亚马逊海外购活动商品满2件,即可享受售价9.5折优惠。 点击查看全部参加活动商品 由 亚马逊美国 提供。 如何获得促销优惠 (促销说明)
提升您的购买力
- *终! 有目的的流行文化!
- 可装下手机、游戏控制器,无论您想要什么,都能充电!
- 附带一条长 182.88 cm 的充电线 - 正是盒子里!
- 重型 PVC 雕像和坚固的底座可以固定,不用像其他易碎的树脂雕像那样破裂。
- 可轻松握住和展示大多数手持电子设备 - 包括新的 Nintendo Lite!
亚马逊海外购
浏览此商品的顾客也同时浏览
第 1 页, 共 1 页第一页第 1 页, 共 1 页
-
Cable Guys Powerstand - 充电站,适用于有线电视机、手机和控制器支架,带耳机支架游戏配件 - 黑色(Xbox 系列 X//)ExquisiteXbox One, Xbox 360, W
购买此商品的顾客也同时购买
第 1 页, 共 1 页第一页第 1 页, 共 1 页
-
可收藏的 Call of Duty Ghost Cable Guy 设备支架 - 适用于 PlayStation 和 Xbox 控制器和所有智能手机 - Simon Riley - 不适合机器*Power UpNot Machine Specific
基本信息
- 包装尺寸 : 25.5 x 18.3 x 15.3 cm; 549.75 克
- 发布日期 : 2019年9月13日
- ASIN : B07WZTJGCR
- 型号 / 款式 : CGCRBL300172
- 亚马逊热销商品排名: 商品里排第276名游戏/娱乐 (查看商品销售排行榜游戏/娱乐)
- 商品里排第25名早期游戏机
- 用户评分:
无顾客评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
3.6 颗星,最多 5 颗星
52 条评论

Tim Scotten
1.0 颗星,最多 5 颗星
Keeps arriving damaged inside of the box. (Manufacturer, not Shipping)
2020年1月24日 -
已在美国亚马逊上发表已确认购买
This piece of gear is a joke. I’ve purchased it 2 separate times and both have arrived with the arms either bent so they don’t hold a controller evenly or in this case, the arm was completely detached from the body and the glue was all dried up. It arrived damaged inside of the box so I believe the actual box for the item just doesn’t protect the item well at all. I am giving up and just refusing to try again as I don’t think it will arrive in a working condition.
5 个人发现此评论有用

Marcelo
1.0 颗星,最多 5 颗星
Please Read
2021年5月19日 -
已在美国亚马逊上发表已确认购买
At first I was very excited to open it up and get claptrap set up on my table, but upon further inspecting of the box it made me thing its been opened before since the latches of the box were practically opened, so once I got it out of the box there were obvious signs that the arms were uneven and a little rubber bits were already graining off and the the right arm pushes a little off the main body. The main reason I got this was because I was a fan of borderlands, overall its a good gift but definitely dont expect the arms do be doing the carrying, I discovered a lil tray that pushes out so it carrys the controller itself instead of the arms, the tray doesn't extend to a large degree so the controller isnt in a snug roomy spot but more like pressed tightly against the model. It was disappointing to get with the condition of the arms but overall a cool gift, I added pictures to show the angles of the arm and the tray, I hope this helps anyone who had any questions about this product.

1.0 颗星,最多 5 颗星
Please Read
2021年5月18日 在美国审核
At first I was very excited to open it up and get claptrap set up on my table, but upon further inspecting of the box it made me thing its been opened before since the latches of the box were practically opened, so once I got it out of the box there were obvious signs that the arms were uneven and a little rubber bits were already graining off and the the right arm pushes a little off the main body. The main reason I got this was because I was a fan of borderlands, overall its a good gift but definitely dont expect the arms do be doing the carrying, I discovered a lil tray that pushes out so it carrys the controller itself instead of the arms, the tray doesn't extend to a large degree so the controller isnt in a snug roomy spot but more like pressed tightly against the model. It was disappointing to get with the condition of the arms but overall a cool gift, I added pictures to show the angles of the arm and the tray, I hope this helps anyone who had any questions about this product.
2021年5月18日 在美国审核
该评价的图片








3 个人发现此评论有用

Kevin R.
5.0 颗星,最多 5 颗星
Much larger than it looks in the advertising
2021年3月13日 -
已在美国亚马逊上发表已确认购买
The entire thing is mostly made of slightly flexible PVC plastic. It is very solidly built and does not tip over at all when "holding" my wireless controller. It is 7 1/2" tall (not including his antenna) and 5" inches wide. By comparison, the Funco Pop CL4P-TP is 2 3/4" tall (not including his antenna) and about 3" wide.
I see a lot of these reviews complaining of the actual arms not supporting the weight of the controller... That's because they were not designed to. At all. The arms are decorative for the most part and sit to either side of the support devise that is actually meant to support the weight of a controller that pulls out of CL4P-TP's chest.
If you just leave the support device inside the chest, he makes a perfectly serviceable pencil holder, eyeglass holder, rubber band holder, etc. If you want to support a phone, game controller, TV remote, etc., expect to employ the pull-out support strut to support the additional weight.
If you use it as it was designed to be used, it's a nifty alternative to a plain support hook or other controller-holding device. And, it's CL4P-TP (which is a huge plus if you are a Borderlands fan).
If you just want a cool CL4P-TP statuette for work or home, this is a great option too.
I see a lot of these reviews complaining of the actual arms not supporting the weight of the controller... That's because they were not designed to. At all. The arms are decorative for the most part and sit to either side of the support devise that is actually meant to support the weight of a controller that pulls out of CL4P-TP's chest.
If you just leave the support device inside the chest, he makes a perfectly serviceable pencil holder, eyeglass holder, rubber band holder, etc. If you want to support a phone, game controller, TV remote, etc., expect to employ the pull-out support strut to support the additional weight.
If you use it as it was designed to be used, it's a nifty alternative to a plain support hook or other controller-holding device. And, it's CL4P-TP (which is a huge plus if you are a Borderlands fan).
If you just want a cool CL4P-TP statuette for work or home, this is a great option too.
1 个人发现此评论有用