- 格式: 电子游戏
Nintendo 任天堂 Switch 手提箱硬壳豪华行李袋，带防盗 TSA 锁
- 拥有一款 Nintendo 开关，确保其他人未经许可就不带开关，或者您正在运行比赛比赛比赛，并且想确保没有人盗到控制台，而这个 Switch 的*开关就是您想要的*！ 使用高品质的 4 位数组合TSA 认证锁，保护您的 Nintendo 开关
- 适合完整的 Nintendo Switch 系统（交换机控制台、坞站、电源适配器、joy-con 握把（即使还配有额外的joy-con、joy-con 带和 HDMI 线缆）和额外的 Switch Pro 控制器，可容纳 21 张游戏卡和其他小配件。
- 有大量衬垫，防止您的开关套装移动，保护完好无损。网袋可增加空间，收纳 HDMI 线缆和其他配件，让它们井然有序、*。
- 作为频繁的航空旅行者和手袋生产者，magictodoor 团队认为 TSA 锁会阻挡一定程度的盗窃。当您外开时您会发现机场排名高不上行。锁孔允许 TSA 使用其特殊的 TSA 钥匙解锁您的锁，所以护套没有钥匙。
尺寸：29.97 x 26.92 x 13.97cm。
注意： 任天堂开关的镂空泡沫和配件适合开关、玩笑握把、坞站、电源适配器、Switch pro 控制器、joy-con 肩带、HDMI 线缆和 21 张游戏卡。
2。 为您的 Switch 物品提供*大保护 当您的 Switch 物品放入预裁的隔间时，不会相互压缩，而且它们很紧密，因此不会在外壳内移动。
3。 便携式 Nintendo Switch 系统和外出专业控制器 配有舒适的肩带和防滑手柄，旅行时携带开关和配件，小巧，可放入背包或手提箱中。
1 x 任天堂开关旅行箱（不包括演唱器和配件）
保修 * 退款*，如果出于某种原因不喜欢新购买的产品，您可以随时退货并全额退款，或者如果商品不处于良好状态，请要求更换。
想了解更多 如果有任何疑问，请在Q&A 上发布您的问题，我们很高兴能把它交给你。
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
>Color-wise, it's plain, which I think is a good thing when it comes to travel.
>The materials used for the outer case are sturdy and feel like the price you pay. This includes the strap, which feels abnormally premium (like a really nice seatbelt), but the same couldn't be said about shoulder pad. I think it should be better padded, but it gets the job done. The weight of the case fully loaded isn't particularly heavy, but I could imagine it getting irritating over time.
>The hand grip is also surprisingly premium feeling, and is quite grippy. I think the looks kind of detract from the overall package, but it really does feel better than it looks.
>TSA lock is a nice touch. It functions much the same as any decent TSA lock so I can't argue with it.
Now for the Inside:
>Inside pocket feels padded, which is good. Inner zipper handle is also made of a harder rubber, which should prevent scratches. It's not super deep, though, so it's only really good for cables and other small accessories.
>21 cartridge holder!!! Really awesome, since I go physical for most of my Switch titles! It doubles as padding and a divider to separate and protect what's below it.
And for the main attraction: Foam!
>The foam quality could be better; it's not the best but it does get the job done. It bends a bit at the thinner parts, but doesn't have much give on the thicker areas.
>Cutouts are very clean and precise. The Switch, dock, and controller cutouts will fit everything tightly. You get a bit more play with the switch dock, but not a whole lot. It can fit an HDMI cable in there, but that might be better off in the zipper pocket.
>Cutouts are also only cut with 1st party controllers in mind. The wired Hori controller and wireless Power A controller wouldn't fit at all. However, the wired Power A controller could just barely fit without the thumbsticks attached.
>Either orientation will work when putting controllers in. I prefer them faced down.
>The Default configuration is solid and will hold everything shown in the product page pretty snuggly. My go-to configuration, however, allows me to fit a second set of Joycons + grip. It helps to have a travel dock which fits far better than the standard dock, and can even accompany the charger in the same slot.
>Foam is easily removable, meaning you can put your own foam cutouts in, or just remove it and use it for something else.
Overall, it's a very solid case and I'm quite content with the purchase!
This case would get a 5/5 except for the fact the foam molds are cut from three thin sections and glued together. The first time I used it and then took my switch out, there was adhesive stuck to the touch screen!
I fixed this issue by cutting the microfiber cloth that came with my Nintendo accessory in half, and stuck pins through the foam to run the cloth along the area the switch screen was catching adhesive. I was very scared my touch screen would be scratched by the time I got it off but I had pure isopropyl alcohol so I was able to break it down without causing damage.
The outside of the case is sleek black. The double zipper is high quality. The locking mechanism is tsa approved and you can set your own 3 digit code. The mechanism is sturdy and a nice feature to have if you want to leave your switch in a hotel room for example.
The inside of the case is where if shines. While there is a solid game cartridge area and a zipper pocket the beauty of this case is the inside foam. This case is designed to fit first party items. Meaning if you have a third party pro controller the analogue sticks may be pressed when fitting into the case. That being said since it fits so tightly the peripheral will not move around. The foam is very high quality. It is easy to place your items in an out of the case without damage the items or the foam.
All in all I would give this a 5 star rating because for the price it is the best way to safely transport the switch and dock along with peripherals. The locking feature is a huge plus.