So once I figured out how to use these they do work great. I would however call them a 2 piece compression connector but they work. Make sure when you compress them that you stop when you feel the click otherwise you will damage the connector and will have to chop it off but I figured out how to make it work.
1. Pull the back boot off and slide it on the cable after stripping the cable
2. Push the connector onto the center conductor and make sure it is fully seated.
3. Push the back boot onto the connector.
4. Insert the connector into your compression tool and compress until you feel a click. Once you feel the click back off or you will damage the connector. If you have a ratcheting compression tool you may need to adjust out your tool to prevent damaging these connectors.
I use these to make HD-SDI cable and 3G-SDI cable and they work great for that application. Highly recommend these.
|商品尺寸||3.81 x 1.27 x 1.27 cm; 13.61 克|
|产品颜色||RG6 BNC Compression|
|制造商||THE CIMPLE CO|