包装尺寸 | 11.71 x 7.49 x 0.99 cm; 18 克 |
---|---|
制造商 | GenBasic |
商品重量 | 18 g |
GenBasic 40 件 公对公 4 英寸(约 10.2 厘米)无焊丝带 Dupon-兼容电路板原型的跳线
GenBasic 40 Piece Male to Male 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping
页面含机器翻译,中文仅供参考,以原文为准
GenBasic 40 Piece Male to Male 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping
|
海外自营
广告
¥44.80¥44.80

12期7.5%费率,每月仅 ¥4.05 最高12期,多种分期方式可选 了解更多
灵活选择分期付款:结算时,选择花呗分期和您需要的分期数。此处仅为按商品金额(未包括税费)估算的示例,实际金额以结算金额为准。
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥7.82×6期 | ¥2.02 (4.5%) | ¥46.82 |
¥4.05×12期 | ¥3.36 (7.5%) | ¥48.16 |
购买选项和加购商品
- 公对公 AWG 26 无焊接带状跳线用于电路板原型设计
- 40 x 10 厘米(4 英寸)并行连接线
- 颜色编码为 10 种颜色和 4 根相同颜色的电线
- 绝缘线外壳,带 2.54 毫米螺距 DuPont 兼容连接器
- 用于开发和原型,与 Arduino、Raspberry Pi、单板计算机、LoveRPi 套件等一起使用
- Male to Male AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping
- 40 x 10cm (4 Inches) Parallel Adjoined Wires
- Color Coded with 10 Colors and 4 Wires of the Same Color
- Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors
- For Use In Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B077N6HFCX |
---|---|
用户评分 |
4.5 颗星,最多 5 颗星 |
我来补充
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
3.7 颗星,最多 5 颗星
60 条评论

Amazon Customer
5.0 颗星,最多 5 颗星
Just what I needed for some breadboard projects
2023年1月18日 -
已在美国亚马逊上发表尺寸: Both已确认购买
really appreciate both the longer and shorter leads.

David
5.0 颗星,最多 5 颗星
Great for breadboarding
2022年11月14日 -
已在美国亚马逊上发表尺寸: Both已确认购买
These are perfect for use on standard electronic prototyping breadboards. You get two lengths, 13 cm and 22 cm. Multiple colors on a ribbon cable, just peel the ones you want to use.

Rick
5.0 颗星,最多 5 颗星
Great for quick and solid connections!
2021年12月8日 -
已在美国亚马逊上发表尺寸: Both已确认购买
I do a lot of "bread-boarding" in electronics for experimentation where I have a wire kit for exact lengths between the holes, but sometimes you need the ability to make fast changes in the connections which is where these jumper wires come in very handy. I bought 3 sets of these for our R&D department, the guys and gals love them!!
1 个人发现此评论有用

David Montoya
1.0 颗星,最多 5 颗星
Not as described
2023年2月21日 -
已在美国亚马逊上发表尺寸: Both已确认购买
Item is not what was advertised , time wasted to return

John
3.0 颗星,最多 5 颗星
Works as intended. These do have a smell but its not as intense as other wires from other sellers/manufacturers.
2017年4月15日 -
已在美国亚马逊上发表尺寸: Both已确认购买
Wires of this type commonly have complaints of strong chemical smells. Sometimes the wires smell so strongly people have to throw them away as they report the smell permeates their house, and others indicate the smell is initially strong but goes away.
These wires do have a chemical smell but its not strong. One must place their nose basically on top of the wires to smell them. I don't like the fact that they have an odor at all, this could mean the chemicals used didn't mix properly but I'm just not sure.
The smell is not strong enough to fill a room. Probably advisable to wash your hands after handling.
As for their function, they work as expected, fitting nicely into the breadboard, and so far none of the black plastic caps have come off.
These wires do have a chemical smell but its not strong. One must place their nose basically on top of the wires to smell them. I don't like the fact that they have an odor at all, this could mean the chemicals used didn't mix properly but I'm just not sure.
The smell is not strong enough to fill a room. Probably advisable to wash your hands after handling.
As for their function, they work as expected, fitting nicely into the breadboard, and so far none of the black plastic caps have come off.