4.0 颗星,最多 5 颗星Great Railblock for the money, but it does require manually cleaning up the edges and gap.
2016年11月14日 - 已在美国亚马逊上发表
已确认购买
This Railblock is super light, well designed and has ratcheting knobs. I understand that for the price, the precision isn't going to be top notch. Since this item is painted, rather than anodized, the inside rail dimensions are just a few thousandths smaller than spec. This required me to pry them open with a screwdriver just a wee bit. The inside of the rod holes were not deburred so they scrached up my carbon fiber rods pretty badly. Again, I just used the screwdriver to debur the inner edges and it fit and works fine now. If you purchase this item, be sure to check the inside of the slots to make sure they are free of sharp edges before putting your rods in them or they will get ugly.
Light and very solid feeling. Ratcheting knobs are great for keeping a clean look and keeping knobs out if the way. I'm using this to hold the main power switch for my rig. I machined an aluminium plate that screws into the threads from the back, gave it a nice brushed finish, and mounted the switch. Looks and functions great! I'll be adding a shoulder pad on a quick release soon under the switch on this same bracket.
5.0 颗星,最多 5 颗星
Perfect for mounting switches.
2018年8月15日 在美国审核
Light and very solid feeling. Ratcheting knobs are great for keeping a clean look and keeping knobs out if the way. I'm using this to hold the main power switch for my rig. I machined an aluminium plate that screws into the threads from the back, gave it a nice brushed finish, and mounted the switch. Looks and functions great! I'll be adding a shoulder pad on a quick release soon under the switch on this same bracket.
该评价的图片
2 个人发现此评论有用
Mike S.
5.0 颗星,最多 5 颗星This is a VERY sturdy rod clamp
2018年1月22日 - 已在美国亚马逊上发表
已确认购买
This is a VERY sturdy rod clamp. I have a Sony A7 in a Vararon Zeus cage and needed to carry a Vlock battery to power the Sony and the Atomos Shogun. I wanted the rig smaller and not place it on a shoulder support, so i purchased 2 of these, cut some inexpensive 15mm rods to about 7", and with a Vlock plate that had rod clpams on it, I have a vlock battey on the side handle and it is incredibly strong with these railblocks
4.0 颗星,最多 5 颗星For the money this works well, smooth finish on the parts
2018年7月16日 - 已在美国亚马逊上发表
颜色: 黑色已确认购买
For the money this works well, smooth finish on the parts - nothing missing that I can see - but how hard is the aluminum relative to screw holes possibly stripping in the future ?? Is this T6064 aluminum? guessing "no". They don't say. Hard aluminum may not have suited the style (Split C clamp) of clamping to the rail. The solution would be stainless inserts for screws...