Per another reviewer, these are not cheap junk, they are metal housings and better than most. Take time to READ THE DIRECTIONS. Myself, I went straight to the default IP address via PC that I changed the IP to be 192.168.1.1 for its address and gateway. Plugged in camera to POE switch that by default uses another network subnet. The isolated PC loaded the menu and I was able to change the default username and PWD (DO IT RIGHT AWAY!) and then change IP to match my other network. Camera rebooted, then accessed it via the set IP address and updated user info to access via my Synology SS. Side note, if you are usinga Synology SS, it is a straight ONVIF setup (wish they would reach tout to Synology to make it native). Ensure you setup the camera settings (Resolution and frame rate) before adding to your Synology or you will have to add it again to get the full res. I use recording and motion detection with SS to control the camera. All seems to be working as it should be at this time. Easy to install and use after you know where the settings are in the camera software. Be sure to turn off other protocols that you will not be using to avoid possible hackers from trying to access it.
If you want a 100% perfect camera, then you need to be able to shell out 1k+ for a commercial Pelco or Lorex solution, if you want something that will do the job needed, then go with this solution.
Side Note: PLAN AHEAD when laying out your cameras to avoid light sources that will shine directly into the cameras, such as landscape lighting and such.
Time will tell if they will hold up and will update review as needed for long term durability.
白色凸轮Hi2162-PTZ3X 2MP-4X Zoom white-2mp
尺寸: 2MP-4X Zoom