新款 3 叶草底 棕榈 Tampers 咖啡色 Leveler Macaroon 防捣蛋器 适用于咖啡研磨 - 58 毫米 黑色 FBA_14182432
- 高品质防滑设计，手洗。 手柄材质为高品质铝合金，底座采用 304 不锈钢
- 易于操作 - 低调设计让咖啡师更容易地在 90 度到柜台的直臂上扎
- 标准压力 - 均匀地再分布咖啡场。为咖啡师提供更大的平面区域，使用手掌轻松控制并保持一致性。
- 高度可调 - 通过其螺丝机制调节高度（无需凸缘、烤肉螺丝或扳手），以适应不同的剂或篮筐
- 顶部直径。 为 6.5 CM。 底座直径为5.7CM，重量，522.6g
Espresso Tamping 是一款在浓咖啡制备中常被忽视的艺术品。
因此 ， 必须防止咖啡珠子中阻力*小的路径并强制水均匀渗透和提取咖啡。
可搭配多溴三苯甲酸（平式迷迭香器）或任何其他 58 毫米的迷彩灯使用。
SMKF distressso 工具帮助各个级别的人士，以追求一致的浓缩咖啡完美。
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
Mathematicians make coffee into theorems, they say.
This leveler, a knockoff of a $180 one, works very well.
Unless you have spent a few years as a barista and can level by hand and tamper with uniform pressure perfectly perpendicular, use this one.
Adjust the height once, so that it rests on the rim of the portafilter cup with tampered coffee.
You don't have to press, its own weight suffices. Forget the tamper.
Make a few turns backwards, to distribute the coffee level, and then spin it forward...
After two months now. I like it even more...
I have a bottomless portafilter and would notice channeling and uneven extraction from time to time. Maybe it was time to take a look at my tamping technique? After doing some research, I became convinced that a leveler could be the solution. I decided to look for an affordable option, as a $100+ leveler seems ridiculous and out of my budget.
I’m happy to say this thing is well-made, easy to adjust, and does what it says. I start by stirring the grounds in the ports filter with a chopstick, then use the leveler instead of a tamper to smooth and level the coffee bed. My extractions over the last few days have been perfectly even, and I feel like there’s a noticeable difference in the cup. Highly recommended.
In making Espresso eliminating as many variables as possible makes achieving a great shot more doable. This device makes distributing an even bed of coffee much easier. Weigh your dose, level the dose without compaction and then tamp for the perfect shot. Consistent!
The piston has 3 gradually ramped faces. The piston is threaded as is the lock ring and cap. Loosen lock ring and cap to adjust piston to level and make uniform the layer of grounds. Lock them all in place by tightening cap to lock ring while holding the piston.
Weigh your dose, sweep with leveler and tamp the perfect shot.