带有，有时艰巨的任务列表，以作为骑行，每个小地方欢迎和确定性。 该 LEZYNE 运动驱动 abs-2地板高跟鞋出品本身几乎 pragmatically 。 这是一个地板高跟鞋，自豪地之一。 适应法式嘴和 shrader 阀，排出系统2 ( abs-2 ) Chuck 固定牢固，这种阀门，点击或扭曲。 这3 . 5英寸显示仪表提供精准的反馈，无需*二猜，永恒的木质手柄、钢气囊留下深刻印象，增加骑行的起始经典风格。
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
Update: When pumping up a tyre the other day the whole chuck blew apart sending components flying, Not very good for a product I have only used for two months. Depending on how the manufacture deals with this issue I will update stars or lower review to 1 star as product will become worthless.
Update: The manufacture not only agreed to repair the product with out hesitation, they let me know why it had a issue and how to fix it. And then sent me a maintenance kit for future use of the pump. Fantastic quick and responsive customer service, also fully accepted the blame in the product fault rather then accusing the customer of misuse or other issues.
This is a very well constructed pump, and has some good weight to it. I have no doubt this pump will outlast me. Sorry, but I'm a sucker for the wood handle too.
The chuck! Ok, one of the best parts about this is the "bleed" feature. So I pump my tires up over pressure, and bleed back to the exact pressure I want. Too cool! There is a lot of misinformation about using this chuck. The key is to go to the manufactures web site and watch the video. There is an outside collar, red on mine, that you have to position right. I was very worried about unscrewing the chuck fron a Schreader valve and loosing a bunch of air. All you have to do is make sure the collar is pulled all the way out, and screw it on. You loose no air. When you unscrew it, the chuck will remove pressue from the valse stem before it vents to the air. In fact, I loose no pressue, much better then my flip lock valve heads. You will hear a little air escape at the end, but that is the air from the hose and gauge. Disputes what several reviews have said, you do not loose pressure inside the tire when you unscrew the chuck.
The gauge. On this model the gauge is big, and easy to see. The only problem is that because it covers such a wide pressure range, it's hard to see "85" psi as opposed to "84 or 86". For me the simple work around is I place a price of tape on the gauge so I only have to decide whic mark is "85" once.
I love the extra long tube. I just put the pump in the middle and I can easily fill both tires.
Is this the right pump for you? Depends. If you ride a bike with wide fat tires at 30 psi, NO!, you would be better off with a high volume pump ( which they also make). If you have a hybrid or a road bike ( skinny high pressue tires) this is without a doubt the pump you want.
By the way, it works great with presto valve tires as well, but about every other review has stated that!