So happy to see that the internal mechanisms are all steel and not that acrylic/plastic crap that was in the original!
*UPDATE(1/21/17): Finally have it installed. And it works just fine. It is listed as a replacement for 699335 which is the part number on my John Deere 928E snowblower with the Briggs 1350 snow series Horizontal shaft engine.
Beware! This snowblower has 3/4" shaft and the cup that comes with this recoil starter only has a 1/2" mounting hole. I used a High-speed 3/4" drill bit to bore the cup hole to the proper size. Also be aware, the 3/4" shaft on this snowblower utilizes a 1-1/4 Nut. Once I had it mounted, the cup was a fraction of an inch too short so when pulled, the pawl ratchets simply slid around the inside of the cup on the tiny 1/16 of an inch rim. I simply removed the cup and inserted a 3/4" flat washer behind it and that gave the necessary clearance for the pawls to engage the cup and turn the fly-wheel. It was a bit more work than I expected but overall it was worth it as this new recoil starter is easily 3x tougher than the factory original.
- 商品尺寸: 22.9 x 22.9 x 5.1 cm
- 商品重量: 635 g
- 发货重量: 771 g
- ASIN: B013EU8QYE
- 用户评分: 分享我的评价