Solid rust converter. Similar to other converters but water based and less expensive. It's my personal favorite, and I have literally tried them all after twenty plus years.
Rather than cover territory other reviewers have shared, let me just share a few tips on how to use Corroseal effectively.
Tip one, use a needle scaler. Many of the "failed" photos here it's obvious that this important step was missed. Only a needle scaler (or chipping hammer if you have the patience) will remove layered rust. A wire brush or sandpaper will not remove layers. Start with a needle scaler.
Tip two, sand paper. Wire brushes can gloss over the rust and create a burnished layer. Use sand paper to expose and remove loose rust.
Tip three, don't use oil based cleaners before application. Also don't use soap...duh, YouTube people. Rubbing alcohol is cheap and works well for this step.
Tip four, apply in a thick layer. This might just be the most valuable tip I can share on Corroseal. Don't just brush on a layer and leave. Brush on a layer, wait 15 minutes and then brush on another. Wait 15 minutes again and brush on another layer. Most applications fail or develop brown spots on top because the product was not applied thick enough. Be generous with it, lay it on thick.
| 商品尺寸 | 25.4 x 9.1 x 8.6 厘米 |
|---|---|
| 产品颜色 | 绿色 |
| 包装清单 | (1) 32 盎司防锈清洁剂 |
| 是否需要电池驱动 | 不是 |
