T2318 Topmount 不锈钢水池
- 304 级高品质不锈钢认证
- CUPC 认证
T2318 单碗顶安装水槽由 304 级不锈钢制成，厚度为 20 号。 表面采用拉丝绸表面，有助于遮盖一段时间内发生的小划痕，让您的水槽多年来看起来美丽。 T2318 的总尺寸为 63.5 厘米 x 55.88 厘米 x 20.32 厘米，橱柜*小尺寸为 60.96 厘米。 该水槽内含 8.89 cm 的中心排水，完全绝缘，并配有吸尘垫。 我们的不锈钢水槽可为您提供有限终身保修，只要您拥有水槽即可。
Characteristics of the T2318
Topmount, Single-Bowl, Stainless Steel Sink
The MR Direct T2318 is a premium choice in topmount-style, stainless steel sinks. This medium-sized bowl features a rectangular shape with broad, easy to clean, corners. Its 20-gauge construction is a bit more economical without sacrificing durability. Sound-dampening pads and a complete insulation coating are included. Four pre-drilled holes along the back panel of the T2318 allow for any style faucet and accessory to be installed. Strainer shown not included.
The T2318 is constructed from premium, 304-grade, cold rolled steel. The manufacturing process is such that this sink is formed from a single piece of steel, using a die and pressure to extrude its unique shape. The chemical properties and composition of the stainless steel used to form the T2318, makes it very resistant to corrosion. cUPC certified.
The T2318 features a solid, 20-gauge measure of stainless steel. At this thickness, it will more than adequately resist accidental dents, or any vibrations from disposal use. The visible steel surface is given a brushed-satin finish which adds to its luster and masks minor scratches which could occur over time.
The T2318 sink is specifically designed to be mounted over the countertop. The rim of this topmounted basin gracefully rolls onto the counter with a raised lip to guard against water runoff. Four pre-drilled holes in the back rim provide for the installation of either a two-handle faucet system, or a single handle design with a base plate. The fourth hole can accommodate a spray hose or soap dispenser.
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|