商品尺寸 | 17.78 x 17.78 x 9.53 cm; 1.2 公斤 |
---|---|
屏幕尺寸 | 6 英寸 |
型号年份 | 2013 |
型号 / 款式 | PLPW6D |
Pyle PLPW6D 6-Inch 600 Watt Dual 4 Ohm Subwoofer
广告
目前无货。
欢迎选购其他类似产品。
欢迎选购其他类似产品。
- 600 瓦功率:这款6.5英寸(约16.5厘米)车载低音炮具有300瓦额定功率至600瓦峰值,能产生高声音共振。它还具有弹簧加载的扬声器端子,将大限度地提高音质
- 无与伦比的性能:采用 30 盎司(约 850.5 克)磁铁制成,通过产生强大的音频和无与伦比的性能来增强汽车立体声或广播。它配有灵敏度或 89dB 的 SPL ,以达到完美的清晰度
- 双音圈:这款扬声器低音炮配有双 4 欧姆阻抗,可连接为 4 欧姆或 8 欧姆。1.5 英寸(约 3.8 厘米)4 层双音圈可抵抗腐蚀并确保更长的使用寿命
- 经过处理的泡沫包裹:完全由经过特殊处理的泡沫制成,经久耐用。采用这种抗悬挂设计,确保设备。这是一款简洁切割的汽车低音炮,配有非压纸锥和黑色塑料篮
- 2.9英寸(约7.4厘米),安装深度:2.9 英寸(约 7.4 厘米)安装深度,易于安装,适合大多数汽车、船只或房车的音频系统。整体直径为 6 英寸。包括必要的电缆、安装模板和手册
产品信息
技术细节
更多信息
ASIN | B0071HY42K |
---|---|
用户评分 |
4.0 颗星,最多 5 颗星 |
Amazon.cn上架时间 | 2012年2月29日 |
我来补充
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
3.3 颗星,最多 5 颗星
1,987 条评论

Daniel Leal
5.0 颗星,最多 5 颗星
Bang For Your Buck !
2023年1月15日 -
已在美国亚马逊上发表已确认购买
I, purchased 2 of the PLPW10D, 10" Subwoofers about 3yrs. ago and was very impressed with the handling capabilities ! I've been banging these bad boy's hard ever since and they are still hitting as hard as they did right out of the Boxes ! So I, bought another for my wife's Jeep and installed it in a Tunable Box . No surprise, it sounds great ! I, want to purchase some of the PLPW12D in the next month or two and If the sound that I, get out of the 10" Subs are any indication of the sound and durability of the 12" subs from this product line . I, know they'll be great ! If anyone is looking for some durable, quality sound on a budget these are for you !! Just follow the Manufacturer's recommended enclosure air space requirements and you won't be disappointed !! Pyle Power great Product !!

Chris Jackson
5.0 颗星,最多 5 颗星
Great Product
2023年1月20日 -
已在美国亚马逊上发表已确认购买
i purchased these speakers to replace some kenwoods subs i recently had and i must say that i am very much surprised how well these sounded. i honestly didn't think that they would compare as far as sound but i was amazed how loud these subs got. It literally had my vehicle vibrating. Never thought out of all the brands that pyle had that much kick, i can honestly say i was dead wrong. One of the best purchases as far as sub speakers i have made in a while!! Great Product!!

mudkicker
5.0 颗星,最多 5 颗星
Good cheap budget sub
2022年9月17日 -
已在美国亚马逊上发表已确认购买
I hope this helps people who don't quite understand the ins and outs of power and wiring your subwoofer.
So I have to question those that make claims about them not being powerful enough or they blew up relatively quick. I think this comes down to not understanding,
1. Your amplifier and RMS ratings
2. How wiring the sub to your amp can cause impedance mismatches.
One reviewer said his sub wasn't loud enough. This makes me believe it's wired in series, producing 8 ohms. Another reviewer says their amplifier is 2 Ohms. Well... If it is a mono block, 2 Ohms is good. If it is a 2 channel you bridged down to one channel, a 2 Ohms stable amplifier seeing a subwoofer wired down to 2 Ohms will either fry the sub, or fry the amplifier. I've seen this fry a voice coil in the sub and destroy filtering circuits in an amp. In this situation what happens is both channels split the load. Meaning you are showing each channel 1 ohm. In this case you would just use 1 voice coil @ 4 Ohms.
Always check the resistance at the terminals to determine if you are wired correctly.
On to the build. These are nice looking entry level subwoofers. Magnet looks good as well. The surround could have been a bit bigger. But hey, less than 60 dollars, can't complain. The bucket is plastic, though it feels rigid enough. Nice spring clip terminals. Nothing fancy. Just a decent design.
Power handling. Guys, never go off of max rating. Period. Go off the RMS numbers. If those aren't listed, I use a formula for estimating an RMS value. Multiply price by 5.5. this would tell me the sub is at roughly 150 watts combined
Sound is good and got better with about 45 minutes breaking in. It is not hitting super low frequencies. But thats ok, it's just a 10" sub. This is a great bang for the buck.
Sensitivity is 90db at 1 watt/1 meter. This is at a specific frequency, I'm thinking somewhere around 50-55hz. So the lower tones, around 35hz have about a 4 db roll-off.
In a good box, these should hit about 40hz fairly clean. They do start breaking up around 170hz. So those that want to match at higher frequency's may be deterred from using this sub.
So I have to question those that make claims about them not being powerful enough or they blew up relatively quick. I think this comes down to not understanding,
1. Your amplifier and RMS ratings
2. How wiring the sub to your amp can cause impedance mismatches.
One reviewer said his sub wasn't loud enough. This makes me believe it's wired in series, producing 8 ohms. Another reviewer says their amplifier is 2 Ohms. Well... If it is a mono block, 2 Ohms is good. If it is a 2 channel you bridged down to one channel, a 2 Ohms stable amplifier seeing a subwoofer wired down to 2 Ohms will either fry the sub, or fry the amplifier. I've seen this fry a voice coil in the sub and destroy filtering circuits in an amp. In this situation what happens is both channels split the load. Meaning you are showing each channel 1 ohm. In this case you would just use 1 voice coil @ 4 Ohms.
Always check the resistance at the terminals to determine if you are wired correctly.
On to the build. These are nice looking entry level subwoofers. Magnet looks good as well. The surround could have been a bit bigger. But hey, less than 60 dollars, can't complain. The bucket is plastic, though it feels rigid enough. Nice spring clip terminals. Nothing fancy. Just a decent design.
Power handling. Guys, never go off of max rating. Period. Go off the RMS numbers. If those aren't listed, I use a formula for estimating an RMS value. Multiply price by 5.5. this would tell me the sub is at roughly 150 watts combined
Sound is good and got better with about 45 minutes breaking in. It is not hitting super low frequencies. But thats ok, it's just a 10" sub. This is a great bang for the buck.
Sensitivity is 90db at 1 watt/1 meter. This is at a specific frequency, I'm thinking somewhere around 50-55hz. So the lower tones, around 35hz have about a 4 db roll-off.
In a good box, these should hit about 40hz fairly clean. They do start breaking up around 170hz. So those that want to match at higher frequency's may be deterred from using this sub.
8 个人发现此评论有用

Kc
5.0 颗星,最多 5 颗星
Great sub for the price to replace oem
2023年1月27日 -
已在美国亚马逊上发表已确认购买
Installed into a toyota avalon to replace the weathered sub. Good sound off factory amp.