- 商品尺寸: 52.1 x 5.1 x 21.6 cm
- 商品重量: 1.81 Kg
- 发货重量: 3.9 Kg
- ASIN: B0051J1POK
- 用户评分: 分享我的评价
American fireglass 不锈钢 drop-in Fire PIT 平底锅和 burner 不锈钢 18 Inch Length x 6 Inch Width
- 采用100% 不锈钢
- 包括 h-shape 燃烧器
这款美国 fireglass 不锈钢长方形烤盘直接火加油站带内置 h-burner 由100% 不锈钢和可提供多种尺码选择。 本嵌入式火锅具有 h-burner 去核。 总部设在阳光加利福尼亚州美国 fireglass 是 reknowned 以其卓越系列的玻璃用于消防工人和其他 fire-based 商品。 来自生态件以 firebeads 反光 mirror-sided 玻璃组件该选择的美国 fireglass 都无与伦比的风格和品质。 难怪他们*热门的 fireglass 供应商。 自由选择尺寸。 采用100% 不锈钢。 h-shape 燃烧器包含在内。
尺寸: 18 Inch Length x 6 Inch Width | 颜色: 不锈钢
|5 星 (0%)|
|4 星 (0%)|
|3 星 (0%)|
|2 星 (0%)|
|1 星 (0%)|
1. A high pressure propane regulator
2. Air mixture valve
At first I was not impressed with the flame then I ordered the high pressure regulator wow what a difference. Also ordered the American Fireglass. Was not super impressed with the shipping as most of it was crushed glass on my 20 lb bag ( not cheap ) I went with 40lbs total more like 30 ish after the crushed glass was removed and weighed out.
I got the 48”x14”. Be aware: some of the answers/reviews on here are incorrect about the sizing. The “AxB” measurement is the length and width of the tray itself, (ie the part that houses the burner and the rocks/glass) but the flange around the top extends out an additional 1.25” on all sides, so that part, in my case, is 50.5”x16.5”. I believe the flange is 1.25” on all of the other models, or at least on the other rectangular and linear ones.
Only had 2 minor gripes about this 1) the burner isn't really bolted down in any way except where the gas hose attaches and 2) no predrilled hose for their brand of electric igniter - but these are very minor and only really noticeable during installation since once the Fireglass goes in, doesn't really matter any more. As one of the previous reviewers mentioned, getting a high pressure adjustable regulator makes a huge difference. I opted to build something that could fit a standard 20lb propane tank. Used some pressure treated 4x4 to frame and screwed on backer board for the base. I then built a form using 3/4 inch melamine board from HD and mixed Cement All rapidset with their flow control (to make it pourable) and set control (to give myself more time to work with it since without it, sets very fast ~15 minutes) and some quickcrete coloring. Mixed and poured a total of 3 55lb bags in the form that gave me ~1 inch thick concrete all around the 4 sides and 1 1/2 inch on top. The melamine boards give the sides a slick polished finish without having to polish. I used a wet grinder (previously purchased from Amazon for another project) to polish the top. There are casters that allow me to move it around. I used some left over ipe decking material to make the lid where the propane tank sits.