Century 钻孔和工具共合金全硬钢胶胶合板圆形锯片 10-inch by 180T 8216
- All hard plate bodies reduce distortion and run-out
- No more splinters cut smooth miter edges and cross cuts
- Easily resharpened when required
- Fits all popular saws
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
美国亚马逊： 33 条评论
This blade is CRAP!!!2019年2月16日 - 已在美国亚马逊上发表
First, the shipper sent two blades. I know I shouldn't complain about that, right? However, the first blade didn't fit my saw, supposed to fit a 5/8" arbor, WRONG. Too small. The second blade did fit so I thought okay, no worries then. In Yoda speak, thought wrong, did I. Of course, using a strait edge guide, I wasn't 4 inches into the first cut on a piece of 3/4" plywood before it began bogging down and started to smoke. Hmm..., maybe if I took it a little slower it would work. But to my utter disappointment there was no change. I only made it another two inches before repeated the behavior. I ended up putting the blade that came with the saw back on which is a 24-tooth saw and not only was able to finish as should be expected but got a better cut. This blade SUX!!! Don't waste your money.
Not happy with this 3-3/8" blade2019年12月9日 - 已在美国亚马逊上发表
It creates a lot of chips for melamine. My large 7-1/4" blade with 60 teeth does a much better job. I tried it on laminate, too. It literally shredded the laminate in large pieces. A 24-tooth 3-3/8" blade did a much better job.
Does not cut well2019年7月4日 - 已在美国亚马逊上发表
bought this to use with my 12v Makita circ. saw for laminates. It worked okay, not great, for that but then I tried cutting some 1/4" plywood and it was terrible; very slow cutting.
5 1/2 inch circular saw blade2019年3月19日 - 已在美国亚马逊上发表
This blade look good but it don't cut that well I used it on plywood and that's all and it still took a bit to cut I don't think that I would buy it again