Elmer's E7330 Carpenter's Wood Glue Max强力木材胶, 1 Gallon
The ultimate adhesive...adheres anything to anything with a permanent, strong, waterproof bond. Requires no mixing and is sandable, paintable and stainable. Best on: Stone, metal, ceramic, wood, foam, glass and more! Clean up: mineral spirits or acetone when glue is wet; sand & scrape when glue is dry. A Color when dry: Yellow For more than 65 years, Elmer's Products, Inc. has been providing creative adhesive solutions that support success and turn ideas into reality.
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
It has a thicker consistency than any of the Titebond glues because it has fine wood fibers mixed into it, much the same way you'd add chopped fiberglass or carbon fiber powder to epoxy resin to make it thicker and stronger and also fill gaps better.
The thicker consistency helps minimize dripping. Projects that I've used it on seem to be bonded very very strongly as you'd expect with any modern wood glue, "stronger than the wood it's bonding".
Very fast set up time means that I only use it for small or simple projects, anything with a complex glue up or multiple parts, much better to use Titebond 2 or 3 for the increased open time.
I see this as a good replacement for Titebond 1 (red) because it sets up just as fast, but I think that it's stronger (those wood fibers) and it's waterproof so you can use it for outside projects.
The set time and adhesion is strong. The stain color isn't noticeable(that's a good thing).
This isnt a water resistant product. So if you're making cutting boards, I would recommend titebond 2 or 3.