商品尺寸 | 35.26 x 43.82 x 9.53 cm; 8.6 公斤 |
---|---|
产品颜色 | 黑色 |
制造商 | Dayton Audio |
商品重量 | 8.6 kilograms |
Dayton Audio SA230 230W 低音炮放大器(黑色)
Dayton Audio SA230 230W Subwoofer Amplifier (Black)
页面含机器翻译,中文仅供参考,以原文为准
Dayton Audio SA230 230W Subwoofer Amplifier (Black)
|
海外自营
广告
¥2,798.11¥2,798.11

12期7.5%费率,每月仅 ¥250.71 最高12期,多种分期方式可选 了解更多
灵活选择分期付款:结算时,选择花呗分期和您需要的分期数。此处仅为按商品金额(未包括税费)估算的示例,实际金额以结算金额为准。
![]() | 3至12期分期付款 由花呗分期提供 |
分期计划 | 手续费 | 总金额 |
---|---|---|
¥954.17×3期 | ¥64.36 (2.3%) | ¥2,862.47 |
¥487.38×6期 | ¥125.92 (4.5%) | ¥2,924.03 |
¥250.71×12期 | ¥209.86 (7.5%) | ¥3,007.97 |
提升您的购买力
- 重型钢底盘,拉丝铝面板
- Mono Class AB 输出舞台,实心、清晰的输出
- 低级别、高水平和 LFE 输入
- 手动、自动或触发的开关模式,可集成到任何自动系统
- 可选低音提升
- Heavy-duty steel chassis with brushed aluminum faceplate
- Mono Class AB output stage for solid, well defined output
- Low-level, high-level, and LFE inputs
- Manual, auto, or triggered on/off modes for integration into any automated system
- Selectable bass boost
亚马逊海外购
产品信息
技术细节
更多信息
ASIN | B004FKGUFK |
---|---|
用户评分 |
4.4 颗星,最多 5 颗星 |
我来补充
商品描述
Dayton Audio SA230 低音炮放大器为拥有者提供自由使用独立的高品质放大器操作低音扬声器系统的自由。
无买家评论
5 星 (0%) |
|
0% |
4 星 (0%) |
|
0% |
3 星 (0%) |
|
0% |
2 星 (0%) |
|
0% |
1 星 (0%) |
|
0% |
评分是如何计算的?
在计算总星级评分以及按星级确定的百分比时,我们不使用简单的平均值。相反,我们的系统会考虑评论的最新程度以及评论者是否在亚马逊上购买了该商品。系统还会分析评论,验证评论的可信度。
此商品在美国亚马逊上最有用的商品评论
美国亚马逊:
4.1 颗星,最多 5 颗星
35 条评论

Customer-KZ
5.0 颗星,最多 5 颗星
3rd Season and still awesome!
2021年10月2日 -
已在美国亚马逊上发表已确认购买
I bought this amp back in 2019 and delayed a review until I could fully assess product durability. It is used to power a Dayton Audio 10 sub(IOSUB 10" IP66) in a 18' x 30' patio - so it s not on all the time nor does it get the same workout that would come from powering a home theater passive sub. Having said that - I love this amp. More than enough power for my patio. The adjustable crossover and gain allow it to be tuned specifically for your setting and main speakers. I have a Crown XLS1002 inside that drives a passive sub as part of a home theater system - while it offers a bit more in terms of settings, it also costs more. For my patio the Dayton Audio works perfect. Highly recommend if you are looking for an amp to power your outdoor sub. Also - if that is what you are shopping for take a good look at the Dayton Audio IOSUB 10" IP66 Sub - I have been very pleased with it as well.

MGB
5.0 颗星,最多 5 颗星
Best budget amp for subs
2022年1月9日 -
已在美国亚马逊上发表已确认购买
I install home theaters as a hobby and have plenty of powered subwoofers. So when installing a home theater for a client he gave me a ton of old home theater gear including a Sunfire Super Jr sub but with non working amp. So quickly converted to passive subwoofer but needed an outboard amp so had a spareDayton Audio APA 150 which works just fine but wanted more control of the amp so bought this SA230 amp. I'm using this just for a stereo music system in my bedroom and this amp pushes the Sunfire sub perfectly fine and blends well with my Boston Acoustic bookshelf speakers to enjoy my diverse taste of Jazz and Rock. Wonderful amp.

Perry Rotzell
5.0 颗星,最多 5 颗星
Dayton Audio SA-230, an excellent subwoofer amp
2020年10月3日 -
已在美国亚马逊上发表已确认购买
When, over several years, my ancient Polk 10" sub blew out 3 manufacture's stock amplifiers and after much research, I decided to go with this table-top amp. Turns out, it is solidly built and has several great features. It has variable gain, frequency and phase controls that allow the user to make precise adjustments that fit the sub, acoustically speaking, into their individual room/speaker set-up. While you can turn it on/off via a front panel button, it also has a timed sensor that turns the amp on and off at the appropriate times, without owner intervention. Or, it can turn on with a 12 volt DC trigger signal provided by many Home Theater receivers, using a standard 1/8 inch trigger cable. The SA-230 connectivity is outstanding! It has a LFE input, fixed RCA inputs and speaker level inputs to facilitate connectivity with any audio amplifier/receiver. It has a back panel bass boost control, for which I found no practical use in my situation! This thing delivers PLENTY of juice to my sub. Rated at 230 watts into a (minimum) 4 ohm load, this should be enough power to satisfy most people's audio subwoofer needs. Dayton does offer a SA-1000 table top sub amp, if you REALLY, REALLY need THAT much power. Highly and happily recommended.
1 个人发现此评论有用

Orchid_Malevolence
4.0 颗星,最多 5 颗星
Good sound and useful features, some minor annoyances
2018年10月9日 -
已在美国亚马逊上发表已确认购买
I'm using this amp to power a 4 ohm 15" Image Dynamics ID in a 4 cubic foot sealed box and it sounds great. So glad someone sells an inexpensive Class A/B sub amp with infinitely variable phase control. The variable bass boost for room correction is a nice touch as well. Buuut, it's not perfect. Bumped the score down to a 4 for the following:
The power indicator is an incredibly bright blue LED (picture attached) which shines directly up into my eyes where I sit in my livingroom. Electronics companies, please stop using blue LEDs for power indicators, I'm begging you.
The auto-on circuit isn't sensitive enough. With my subwoofer output at normal (+/-0dB) I have to turn my receiver up to like 50+ (normal listening volume is 40) to get it to kick on. Not a huge deal since I'm using the included 12v trigger, but just something to be aware of.
The knobs on the front, even when pushed in, are too easy to turn - just brushing against the unit can turn them.
Anyway, great amp with some minor, correctable niggles.
The power indicator is an incredibly bright blue LED (picture attached) which shines directly up into my eyes where I sit in my livingroom. Electronics companies, please stop using blue LEDs for power indicators, I'm begging you.
The auto-on circuit isn't sensitive enough. With my subwoofer output at normal (+/-0dB) I have to turn my receiver up to like 50+ (normal listening volume is 40) to get it to kick on. Not a huge deal since I'm using the included 12v trigger, but just something to be aware of.
The knobs on the front, even when pushed in, are too easy to turn - just brushing against the unit can turn them.
Anyway, great amp with some minor, correctable niggles.


Orchid_Malevolence
评论于 2018年10月9日 在美国 🇺🇸 发布
The power indicator is an incredibly bright blue LED (picture attached) which shines directly up into my eyes where I sit in my livingroom. Electronics companies, please stop using blue LEDs for power indicators, I'm begging you.
The auto-on circuit isn't sensitive enough. With my subwoofer output at normal (+/-0dB) I have to turn my receiver up to like 50+ (normal listening volume is 40) to get it to kick on. Not a huge deal since I'm using the included 12v trigger, but just something to be aware of.
The knobs on the front, even when pushed in, are too easy to turn - just brushing against the unit can turn them.
Anyway, great amp with some minor, correctable niggles.
该评价的图片

2 个人发现此评论有用

Kevin
5.0 颗星,最多 5 颗星
Better than a built-in.
2020年5月1日 -
已在美国亚马逊上发表已确认购买
Should have bought this from the start. I have a DIY sub, but wasn't sure which amp to install. Having a separate amp also makes it easy to upgrade. My first amp went kaput and I was limited to replacement options. So, I just covered the hole. added a terminal and got this amp. Having the controls easily accessible is great for fine tuning. However, I did have to put some tape over the power light; it is very bright. Especially when the only light in the room is the TV monitor. Quiet turn on/off, and no hum. I'm satisfied.
1 个人发现此评论有用