Disston Remgrit Holesaw 29mm 1215I7WS9M9
- Cuts extremely hard abrasive materials
- Cutting edge of tungsten carbide particles bonded to alloy steel back
- High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
美国亚马逊： 5 条评论
It cut through the plaster and lath nicely and it still has most of the carbide left ...2017年11月29日 - 已在美国亚马逊上发表
Dimensions are not quite 3 3/4 inches as indicated. It cut through the plaster and lath nicely and it still has most of the carbide left after drilling 12 holes, but because it wasn't the right size, I was up in the ceiling chewing out pieces of lath with a wrench to make my electrical boxes fit. It took 3-4 times as long as it should have.
Disston RemGrit carbide 4-1/2inch hole saw.2013年11月16日 - 已在美国亚马逊上发表
Very good product and does such a great job cutting through stucco neatly. It did such a wonderful job and cut smoothly through the stucco, wrap, metal lathe, and even the wood. I am amazed that I was able to purchase this cheaper from the UK and have it shipped to Colorado than buying it here in the USA. It took a few extra days but that was fine for me as I was not in a hurry. I also ordered the mandrel which is ingenious how it snaps on.
Worked great on plaster2017年1月3日 - 已在美国亚马逊上发表
Worked great on plaster. Used it on about 20 holes and no signs of dullness. I used it in combination with MK Morse Hole Saw AT54 3-3/8-Inch Diameter Carbide Tipped because the latter works better on the lath portion, had two drills ready and alternated back and forward between the two hole saws.