Starting off with the worst point, the threads stripped on the axle on my first install! I usually keep the nut fairly tight on my old axle with no problems, but in this case, I hadn't torqued the nut too much before the threads stripped, which kind of ruins the axle.
As others have mentioned, all the parts aside from the ball bearings are black, as opposed to what is shown in the picture. This is fine, although misleading. Something I didn't like was that the inner race on the cup still had the black oxide layer on it from heat treating, so it wasn't precision ground after heat treating as you would expect on a bearing race.
The caged bearings make assembly easier, but I decided to not use it as it does force you to use one fewer ball bearing. I don't intend to be disassembling my wheel too often, so the added convenience of the cage is minimal. The price is also quite reasonable.
轮毂轴套件后部单速 3/8X26Tpi 164 毫米轴承器
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
美国亚马逊： 8 条评论
Decent2019年10月6日 - 已在美国亚马逊上发表
This is decent quality and comes with bearings. But the bearings that come with don’t fit the SE Big Flyer so i knocked a star off.