The speed threader is very easy to use and cuts the threads wish ease. After reading a negative review it was clear that the individual had no experience using a threader. I have very limited experience with tap and die sets (mostly re- tapping screw holes and cleaning up dirty screw threads) and have never cut threads on 3/8" rod before so I wasn't sure what to expect. I simply ground a very slight chamfer on the end of the rod, placed the threader on the starting side, put a few drops of cutting oil inside the threader, and had 3" of thread cut within 5 minutes of opening the package it was sent in.
The price was very reasonable and I will definitely order additional sizes as the need arises.
Champion Speedthreader HSS 冲压永久集成手柄，带自中心指南 ST-1/2-20 ST-1/2-20
- Premium quality HSS die cuts new threads and repairs damaged threads
- "Easy-grip" handle is comfortable to use and eliminates slipping
- Each Speedthreader can thread up to 13 linear feet of rod
- Eliminate clumsy dies and die stocks
- Ideal for mechanics, maintenance and repair, plumbing, fasteners specialists, equipment & vehicle repair
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
美国亚马逊： 29 条评论
This simple threading tool allowed me to "clean up" the threads quickly and easily. I had about 20 pcs to do and ...2015年2月18日 - 已在美国亚马逊上发表
I had a project (ongoing) where I cut 3/8-16 rod into short 1.5" pieces and weld one end into a steel tube. I was having trouble with the threads not working from being cut. This simple threading tool allowed me to "clean up" the threads quickly and easily. I had about 20 pcs to do and did them all in just a few minutes and the threads worked perfectly to screw some Phenolic knobs onto. A real time save and comfortable to use. If you need to clean up threads with any frequency I'd definitely get one of these tools. It's been a big help on my projects.
B. L. Baron
Great tool for re-threading!2015年12月28日 - 已在美国亚马逊上发表
It worked great for rethreading 3/8" studs that were severely corroded and distorted. I got the speedthreader as a last resort- if that didn't work then I would have to jackhammer the concrete and recast bolts to hold an outdoor lamppost. From some reviews I was concerned about the plastic handles, but they were very sturdy- when threading you need to use some oil and if there is much resistance you need to back up a bit to break off the chips of waste metal...if you do that fairly often there isn't much force required to turn the die. The handles are long, so it was nice to have plastic to cut to shorten the handles to fit the workspace. The die has a ring to help center the workpiece, which was helpful. The ring collected chips of metal, so I found that it worked better to flip the die once the threads were well started. The seller was very quick to ship, so my experience was all good!
Cut 3/8 aluminum rod to make a J-pole antenna2017年6月8日 - 已在美国亚马逊上发表
worked well with Tap magic aluminum cutting fluid.
This thing worked great! If you know how to cut threads2014年11月10日 - 已在美国亚马逊上发表
I had to chase the threads on my new snow blower's shear bolts due to the fact the new (Poulan Pro) bolts' threads were 1/4 too short as compared to the originals.This thing worked great!If you know how to cut threads,use lube,and have the proper diameter stock to cut.It even got a bit warm but I cut 12 shear bolts to perfection.