raindrip r335ct drip watering 旋转弯管组件适用于 risers ，1 / 2 & 3 / 4-in . 黑色 1/2 In. & 3/4 In.
全新品 1 售价从 ￥49.86 起
|5 星 (0%)|
|4 星 (0%)|
|3 星 (0%)|
|2 星 (0%)|
|1 星 (0%)|
美国亚马逊： 4 条评论
Needs a pressure compensator if converting one spray riser to drip.2018年8月3日 - 已在美国亚马逊上发表
First, it says it's for two 1/2 in hoses, but it's an elbow not a tee. However my big issue is that when you're converting a spray head to a drip you're adapting a high pressure stream to something drip-friendly, so there needs to be a pressure compensator installed either for the whole circuit or for the individual riser. Since this irrigation circuit in my yard is going to be mixed spray and drip I found I needed to either add a pressure compensator to this item - which was somewhat pricey - or find a swivel elbow assembly that includes it, which I did.
Leaks2018年11月8日 - 已在美国亚马逊上发表
Completely leaks out of every joint when the sprinklers are running. Usually I can put another rubber gasket or some teflon tape but those aren't working. Disappointing
A real lifesaver2009年5月28日 - 已在美国亚马逊上发表
Until I tried this type of elbow joint I was always using the standard fixed elbow joints which when trying to configure your system can sometimes be a pain. With the swivel elbow I had alot more leeway in how I laid things out and it allowed me to circumvent small problem areas where the fixed elbows were not working so good as they had no flexibility in how I laid them out.