IRWIN Tools Classic Series Steel Table/Miter Circular Saw Blade, 10-Inch 180T (11870)
- Precision-ground teeth allow for smooth, accurate cuts.
- Fully hardened plate runs truer longer. Heavy-gauge high-carbon steel for extended life.
- Features a 5/8-Inch Universal Arbor.
- 180 tooth count is ideal for cutting TCG plywood, OSB, veneer, and plastic.
|5 星 (0%)||0%|
|4 星 (0%)||0%|
|3 星 (0%)||0%|
|2 星 (0%)||0%|
|1 星 (0%)||0%|
美国亚马逊： 130 条评论
White Vinyl fencing2017年11月12日 - 已在美国亚马逊上发表
Brought this to rip cut and miter cut vinyl fencing. This was a great blade for the job. I had one on my miter saw and one on the table saw, both worked flawlessly without any chipping. Just make sure the blades are at top rpm and slow, steady cuts, no need to rush.
Irwin should be good2019年2月14日 - 已在美国亚马逊上发表
https://www.amazon.com/gp/your-account/order-history/ref=ppx_yo_dt_b_pagination_1_2?ie=UTF8&orderFilter=year-2019&search=&startIndex=10 I bought an Irwin 180 tooth 10 inch table saw blade July 2, 2018. I put it in my saw for the first time yesterday February 12, 2019. I needed it to be able to saw miter joints for framing. To my surprise the blade has a warp in it and does not cut perfectly. It is past the return point. I often buy stuff for my shop that may not get used for a long time. I guess I have been had.
Works well with acrylic and would recommend! A+2017年11月1日 - 已在美国亚马逊上发表
I have been using these blades to cut my acrylic without any problems at all. Cuts the acrylic well and doesn't crack the material, which is always a good thing when you are working with plastic. Highly recommended!
the blade that could2017年9月25日 - 已在美国亚马逊上发表
this blade worked really well on bamboo flooring. i went through 2 of them but any one in flooring will tell you bamboo is one of the hardest floors made. it did the job at a cheap price. i dont know if this blade could stand up to construction site demands, but if you have some wood cutting jobs and you dont want to spend $50-100 for one blade, try one of these first. i will keep a couple of these on hand, on softer wood i think you can get a lot of cuts out of one blade.
Dull dull dull!2019年11月12日 - 已在美国亚马逊上发表
I used this with my chop saw to cut baseboard mouldings. From the first cut the blade struggled to cut through baseboard! The blade would heat up and burn the wood. Totally unacceptable from a brand new blade. I do not recommend this blade.